This Guide Refers To The Following Wheelsets
- HUNT 50 Carbon Aero Disc
- HUNT 4050 Carbon Aero Disc
- HUNT 30 Carbon Aero Disc
- HUNT 34 Aero Wide Disc
- HUNT Aero Light Disc
Fitting Front QR, 12mm or 9mm adaptors:
1. Remove wheel from bike and remove any disc rotors and disc rotor adaptors if fitted.
2. Pull out the current adaptor cap with your hands, no tools required.
3. Insert the new cap into the hub end (longer one on the disc side, shorter on the non disc side). This should be done with the widest part against the bearing.
Did you find it helpful?Send feedback