The amount of sealant required for tubeless tyres depends on the width. As a rule, there should be enough to coat the inside of the tyre wall and leave a small puddle in the bottom of the tyre.
When fitting tyres to use wheels we use the following measurements as a base guide (note that you can use more if you feel it is necessary):
- 23mm tyres – 30ml
- 25mm tyres – 40ml
- 28mm tyres – 50ml
- 32mm tyres – 60ml
- 35mm tyres – 70ml
- 40mm tyres – 80ml
- 3.0" tyres - 200ml
- 2.5" tyres - 150ml
- 2.3-2.4" tyres - 120ml
The sealant is water-based and will eventually dry out. We recommend topping up the sealant levels every 2-3 months depending on weather conditions. If it is extremely hot or the wheels are stored in a warm place then you may need to top up the sealant more often. To top up the sealant, please refer to our tubeless tyre fitting guide here.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article